思科交换机强制初始化密码 作者: A diligent City lion 时间: 2020-04-20 分类: 思科 评论 打开超级终端,关闭交换机; 超级终端设置:Baud Rate: 9600,Data bits: 8,Parity: None,Stop bits: 1,Flow control: None MDS SWITCH SW1 LOGIN: 2009 OCT 15 11:19:06 SW1 %PLATFORM-2-PS_FAIL: POWER SUPPLY 2 FAILED OR SHUTDOWN (SERIAL NUMBER PAC12113050) 打开交换机电源 >> MDS-Bootloader-01.00.06 (Feb 7 2007 - 19:22:57) (MPC8541E) CPU: 8541, Version: 1.1, (0x807a0011) Core: E500, Version: 2.0, (0x80200020) Clock Configuration: CPU: 999 MHz, CCB: 333 MHz, DDR: 166 MHz, LBC: 41 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled INFO: Booting off primary flash. I2C: ready DRAM: DRAM: Total SDRAM memory is 512 MB 20000000 INFO: SDRAM tests PASSED. DRAM: ECC initialization in progress...Done. INFO: Board rev = 4 type = 4 index 9032 L2 cache 256KB: enabled IDE: Bus 0: OK Device 0: Model: SILICONSYSTEMS INC 256MB Firm: Ser#: 028TTS7DSt703SC02061 Type: Hard Disk Capacity: 248.5 MB = 0.2 GB (508928 x 512) Booting bootflash:/m9100-s2ek9-kickstart-mz.3.2.1a.bin ... ............. Automatic boot of image at addr 0x00000000 ... Starting kernel... INIT: version 2.78 booting Checking all filesystems..... done. Loading system software **在此处按住ctrl+]交换机进入boot模式** INIT: Switching to runlevel: 1 IStopping kernel log daemon: klogd. Sending all processes the TERM signal... done. ^]Sending all processes the KILL signal... done. Entering single-user mode... INIT: Going single user INIT: Sending processes the TERM signal Cisco Storage Area Networking Operating System (SAN-OS) Software TAC support: http://www.cisco.com/tac Copyright (c) 2002-2007, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained herein are owned by other third parties and are used and distributed under license. Some parts of this software may be covered under the GNU Public License or the GNU Lesser General Public License. A copy of each such license is available at switch(boot)# conf t **进入配置模式** Enter configuration commands, one per line. End with CNTL/Z. switch(boot)(config)# admin-password p@ssw0rd123 **修改admin的密码** PAM_unix[611]: Password for admin was changed switch(boot)(config)# exit **退出配置模式** switch(boot)# dir **显示bootflash的文件** 12288 Jun 20 16:34:23 2008 lost+found/ 14675456 Jun 20 16:35:38 2008 m9100-s2ek9-kickstart-mz.3.2.1a.bin 64707517 Jun 20 16:37:27 2008 m9100-s2ek9-mz.3.2.1a.bin Usage for bootflash: filesystem 83921920 bytes total used 70132736 bytes free 162455552 bytes available switch(boot)# load bootflash:m9100-s2ek9-mz.3.2.1a.bin **加载引导系统文件** Uncompressing system image: bootflash:/m9100-s2ek9-mz.3.2.1a.bin CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC INIT: Switching to runlevel: 3 INIT: Sending processes the TERM signal Iwitch(boot)# **等待交换机加载完毕出现登录提示** MDS Switch 2009 Oct 15 11:24:12 sw1 %PLATFORM-2-PS_OK: Power supply 1 ok (Serial number PAC12213255) 2009 Oct 15 11:24:12 sw1 %PLATFORM-2-PS_FANOK: Fan in Power supply 1 ok 2009 Oct 15 11:24:12 sw1 %PLATFORM-2-PS_OK: Power supply 2 ok (Serial number PAC12113050) 2009 Oct 15 11:24:12 sw1 %PLATFORM-2-PS_FANOK: Fan in Power supply 2 ok 2009 Oct 15 11:24:12 sw1 %PLATFORM-2-FAN_OK: Fan module ok 2009 Oct 15 11:24:12 sw1 %PLATFORM-2-FAN_OK: Fan module ok 2009 Oct 15 11:24:12 sw1 %PLATFORM-2-FAN_OK: Fan module ok sw1 login: admin Password: Cisco Storage Area Networking Operating System (SAN-OS) Software TAC support: http://www.cisco.com/tac Copyright (c) 2002-2007, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained herein are owned by other third parties and are used and distributed under license. Some parts of this software may be covered under the GNU Public License or the GNU Lesser General Public License. A copy of each such license is available at sw1# show run **查看原有配置信息** version 3.2(1a) fcdomain domain 10 static vsan 1 fcdomain fcid database no system default switchport shutdown interface fc1/1 interface fc1/2 interface fc1/3 interface fc1/4 interface fc1/5 interface fc1/6 interface fc1/7 interface fc1/8 interface fc1/9 interface fc1/10 interface fc1/11 interface fc1/12 interface fc1/13 interface fc1/14 interface fc1/15 interface fc1/16 interface fc1/17 interface fc1/18 interface fc1/19 interface fc1/20 interface fc1/21 interface fc1/22 interface fc1/23 interface fc1/24 switchname sw1 role name default-role description This is a system defined role and applies to all users rule 1 permit show feature system rule 2 permit show feature snmp rule 3 permit show feature module rule 4 permit show feature hardware rule 5 permit show feature environment username admin password 5 $1$a3GxWVbH$K2i14D0BtT.pblnI01NBo1 role network-admin boot kickstart bootflash:/m9100-s2ek9-kickstart-mz.3.2.1a.bin boot system bootflash:/m9100-s2ek9-mz.3.2.1a.bin kernel core target 0.0.0.0 kernel core limit 1 snmp-server user admin network-admin auth md5 0xec3eccab3709e80dde17d3151b8ab5d9 priv 0xec3eccab3709e80dde17d3151b8ab5d9 localizedkey no snmp-server enable traps vrrp snmp-server enable traps license callhome zone name crmdb1_HBA1_DMX3_4a vsan 1 zone name crmdb1_HBA4_DMX3_13a vsan 1 zone name crmdb2_HBA1_DMX3_4a vsan 1 zone name crmdb2_HBA4_DMX3_13a vsan 1 zoneset name sw1 vsan 1 zoneset activate name sw1 vsan 1 interface fc1/1 port-license acquire no shutdown interface fc1/2 port-license acquire no shutdown interface fc1/3 port-license acquire no shutdown interface fc1/4 port-license acquire no shutdown interface fc1/5 port-license acquire no shutdown interface fc1/6 port-license acquire no shutdown interface fc1/7 port-license acquire no shutdown interface fc1/8 port-license acquire no shutdown interface fc1/9 interface fc1/10 interface fc1/11 interface fc1/12 interface fc1/13 interface fc1/14 interface fc1/15 interface fc1/16 interface fc1/17 interface fc1/18 interface fc1/19 interface fc1/20 interface fc1/21 interface fc1/22 interface fc1/23 interface fc1/24 interface mgmt0 switchport speed 100 ip address 192.168.11.1 255.255.255.0 sw1# copy running-config startup-config [########################################] 100% **确认后将更改的密码保存退出**